| 品牌：合一电池 | 型号：多种型号 | 额定容量：可定制mah |
| 标准电压：3.7V | 加工定制：是 | 充电电流：5CA |
| 外型尺寸：可定制mm | 适用类型：低温设备，移动设备 | 产品认证：CE |
| 适用产品型号：多种型号 | 充电时间：1 | 电池类型：低温锂电池 |
| 外形尺寸：可定制 |
电池性能检查及测试 Battery Performance Criteria
1 外观 Appearance
电池外表面清洁，无电解液泄漏，无明显的划痕及机械损伤，无变形，无影响电池价值的其它外观缺陷。
There shall be no such defect as scratch, flaw, crack, rust, leakage, which ,may adversely affect commercial value of battery.
2 测试设备要求 Measurement Apparatus
(1)尺寸测量设备 Dimension Measuring Instrument
测量尺寸的仪器的精度就不小于0.01mm
The dimension measurement shall be implemented by instruments with equal or more precision scale of 0.01mm.
(2)电压表 Voltmeter
***或更灵敏等级，内阻不小于10 KΩ/V.
Standard class specified in the national standard or more sensitive class having inner impedance not less than 10KΩ/V.
(3)电流表 Ammeter
***或更灵敏等级，外部总体内阻包括电流表和导线应小于0.01Ω。
Standard class specified in the national standard or more sensitive class. Total external resistance including ammeter and wire is less than 0.01Ω.
(4)内阻测试仪 Impedance Meter
内阻测试仪测试方法为交流阻搞法（AC 1kHz LCR）.
Impedance shall be measured by a sinusoidal alternating current method(AC 1kHz LCR meter).
3 标准的测试条件 Standard Test Condition
测试电池必须是本公司出厂时间不超过一个月的新电池，且电池未进行过五次以上充电循环，除非其它特殊要求，本产品规格书规定的测试环境条件为：温度25±2℃，相对温度45%～85%，大气压: 86～106Kpa。
Test should be conducted with new batteries within one month after shipment from our factory and the cells shall not be cycled more than five times before the test. Unless otherwise defined, testand measurement shall be done under temperature of 25±2℃ and relative humidity of 45%～85%，Atmospheric pressure：86～106Kpa
湖南合一能源科技有限公司，低温电池、低温锂电池、***温锂电池、低温18650锂电池、18650动力电池组、磷酸铁锂电池组、矿用锂离子电池、低温高倍率锂电池、储能锂电池组生产制造专家，更多产品信息详见合一电池工厂网站。
（以上价格仅供参考，具体价格以实际详谈为准。）
